Contractor Series 15A MiniPort (CN-15MP)

Contractor Series 15A MiniPort (CN-15MP)

120 Volts 

Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, and/or control and automation systems.

$372.95
0
Save $0.00
Quantity

or purchase from an Authorized Retailer

  • Description

  • Specifications

  • Warranty

  • Resources

Description

Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, and/or control and automation systems.

 

DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.

 

Sequencing of duplex initiated remotely by standard analog triggering (remote terminal) or digital link (SmartSequencing from CN-1800S or CN-2400S).

 

The CN-15MP can shut itself off automatically when triggered by a fire alarm.

Technical Specifications

Family

Contractor Series

Line Voltage

120 Volts

AC Voltage Input Range

90-139VAC, 50/60Hz

Maximum AC Current Rating

15 amps (Thermal breaker)

AC Cord

3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug

AC Receptacles

2 NEMA 5-15R’s (1 duplex)

AC Undervoltage Protection

EVS, 77VAC+/-3VAC

AC Overvoltage Protection

EVS, 140VAC+/-5VAC

AC Overvoltage Reset Modes

Manual and Auto-reset (configurable)

Operating Temperature Range

5°C (40°F) to 40°C (105°F)

Humidity Range

<90% Relative Humidity

Circuit Breaker

Pushbutton, 15A

Front Panel Diagnostic Indicators (LED)

Power, Extreme Voltage, Primary Link, Secondary Link

Side Panel DIP Switch Features

1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off, GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual

Side Panel Potentiometer

Allows fine-tune delay adjustments

Remote Terminal

+5-30VDC In, 12VDC (12mA) Out

SmartSequencing

Phoenix-type 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)

Remote Terminal

Phoenix-type 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY_OUT (Class 1 Wiring)

Force Off

Phoenix-type 2-Pin Connector With Screw Terminals, FORCE OFF (Class 1 Wiring)

RS-232 Compatible

Yes, indirectly, when connected via SmartSequencing to a Furman Smart Sequencer with an RS-232 port

Voltmeter

Available with SmartSequencing, ±2VAC accuracy

Ammeter

Available with SmartSequencing, ±1A accuracy

Power Consumption (No Load)

10 Watts

Safety Agency

CSA, RoHS Compliant

UPC

654061028475

Proposition 65 Warning

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

15 Year Limited Warranty

Important Note for Internet Purchasers

 

  • YOUR FURMAN WARRANTY WILL NOT BE VALID IF YOU PURCHASE A FURMAN PRODUCT FROM AN UNAUTHORIZED AUDIO VIDEO INTERNET DEALER, or if the original serial number has been removed, defaced or modified.
  • Only authorized dealers provide NEW Furman products — not used or refurbished — and have the training and expertise to assist you in selecting the correct model for your application. They also have the knowledge to correctly answer any questions regarding proper installation and ensure that your Audio Video system is fully protected. Purchase your Furman product from one of our Authorized Online dealers.
  • Note: Furman products purchased through auction sites DO NOT have a valid warranty.
Title

SAVE YOUR SALES RECEIPT

 

The receipt is your proof of purchase and confirms the product was purchased at an authorized Furman dealer. It will need to be submitted to Furman in order to process any warranty claims. Online registration is no longer required for any Furman products.

Furman product warranties vary by model/product family. See below for warranty length by product family. Warranty term begins upon date of purchase on sales receipt. For specific warranty terms and conditions or for warranty information on products not listed below please see your product manual.

Resources

Manual

Datasheet

Warranty Info

Special Features

15A SmartSequencing

SmartSequencing™

SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key

Voltage Protection

Extreme Voltage Shutdown (EVS) safeguards from catastrophic under-voltage (under 80V sustained) or over-voltage (over 145V sustained) conditions. The EVS feature can be selectively enabled or disabled according to the preference of the user

Diagnostic Lights

Diagnostic lights provide valuable system information including power quality

15 Amp Output Current

15 amp maximum current capacity with incorporated 15 amp thermal circuit breaker

DIP Switch Customization

DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches