Contractor Series - Power Sequencers - 120V

Furman Contractor Series equipment also allow sound reinforcement equipment to be remotely powered up or powered down over a large distance, not just in the immediate vicinity of the operator. Additionally, Maintained or Momentary mode contact switching allows the user great flexibility when controlling the unit from a remote location. A remotely mounted switch or control pad can be used to sequence equipment on or off.

CN-1800S Contractor Series Smart Sequencer

Front

Rear

Contractor Series CN-1800S SmartSequencer

This sequencer is ideal for A/V installers designing centralized, rack-based systems for mission-critical installations where zero downtime is the standard. The CN-1800S is intended to be the core power distribution and protection unit for an entire equipment rack, simplifying control so that even non-technical personnel can safely power the system on or off with a simple button press or key turn. It is the perfect choice for any 15 Amp installation that demands not only sequencing but also the highest quality AC noise filtration (LIFT) and protection from catastrophic surges (SMP) and voltage events (EVS). Integrates with any of the CN Series for scalable multi-location sequencing.

$809.95

Learn More

SMP Advanced Surge Protection

Linear Filtering Technology

EVS Voltage Protection

9 Outlets

15A Rating

Diagnostic Lights

Isolated Outlet Banks

Power Sequencing

CN-2400S Contractor Series SmartSequencer

Front

Rear

Contractor Series CN-2400S SmartSequencer

The CN-2400S is built for professional A/V integrators assembling high-density equipment racks with significant power demands. It is the ideal cornerstone for installations that require a 20 Amp power capacity to support a full rack of high-current gear. This unit is intended for use in complex systems in performance venues, houses of worship, or boardrooms where simplified, safe control via a keyswitch is needed, while also providing the most robust power protection available. When a system requires a 20 Amp circuit and uncompromising performance, the CN-2400S provides advanced protection (SMP), noise filtration (LIFT), and voltage protection (EVS) to ensure reliability. Integrates with any of the CN Series for scalable multi-location sequencing.

$919.95

Learn More

SMP Advanced Surge Protection

Linear Filtering Technology

EVS Voltage Protection

9 Outlets

20A Rating

Diagnostic Lights

Isolated Outlet Banks

Power Sequencing

Title

Power Distribution

Furman Power Distribution models provide convenient rackmount solutions for delivering AC power to multiple circuits when a hard-wired, built-in system is not available.

Title

ASD-120 2.0 120 Amp Sequenced Power Distro

Front

Rear

Six Channel Sequencing Power Distributor ASD-120 2.0

The Furman ASD-120 2.0 is ideal for any large-scale application where AC power must be distributed to multiple, high-current circuits and activated in an orderly, time-delayed sequence. It is perfectly suited for theaters, stadiums, house of worship, venues, broadcast, recording studios, and on-location film or video shoots. By managing the power-on sequence, it is essential for preventing the speaker "pop" that can damage components and for avoiding nuisance breaker trips caused by the simultaneous in-rush current of many devices. Professionals who need to reliably manage and sequence power for an entire event production or complex installation will find it an indispensable tool for protecting equipment and ensuring stable operation.

$1,379.95

Learn More

Title

Additional Power Relay Products

Title

Contractor Series CN-15MP MiniPort

Ideal for A/V contractors and system integrators, the CN-15MP is designed for installations where equipment, such as powered speakers, is located remotely from the primary system rack. It is intended for use in complex A/V systems that require components to be powered on and off in a specific, safe sequence. This unit is perfect for when you need to extend sequenced 15 Amp power control to a display, projector, or speaker array, while integrating it seamlessly into a larger system via dry contact closure or trigger from a fire alarm. Also Integrates with any of the CN Series for scalable multi-location sequencing.

$349.95

Learn More

Contractor Series CN-20MP MiniPort

The CN-20MP is the perfect solution for commercial installers working with remote equipment that has higher power requirements. It is specifically intended for scenarios where powered devices demand a 20 Amp capacity circuit, a common requirement for high-output active speakers or other power-hungry components. This MiniPort is ideal for extending safe, sequenced power to these devices when they are located far from the main equipment rack, ensuring they can be safely powered on and off as part of a large, complex A/V system. Also Integrates with any of the CN Series for scalable multi-location sequencing.

$469.95

Learn More

Maintained Contact Remote Control Panel RS-1

The Furman RS-1 is ideal for permanent installations that require simple, secure, and centralized control of a power sequencing system from a single location. Its maintained contact, key-operated switch is perfect for environments like houses of worship, boardrooms, classrooms, and small venues where you need to ensure that the system can only be turned on or off by authorized personnel. The RS-1 provides a definitive on/off state, making it a reliable and straightforward solution for daily operations and preventing accidental power cycling of sensitive audio and video equipment.

$83.95

Learn More

Momentary Contact Remote Control Panel RS-2

The Furman RS-2 is the ideal control solution for facilities that require the flexibility to initiate a power-on or off sequence from multiple locations. Its momentary contact pushbutton allows for multiple remote switches to be wired in parallel, making it perfect for theaters, large event spaces, and multi-room venues where control is needed at a stage, in a control booth, and backstage. The locking key switch provides an added layer of security by enabling or disabling the start buttons, ensuring that the system can be controlled from various convenient points without sacrificing security.

$83.95

Learn More

AC Relay Accessory PS-REL

The Furman PS-REL is ideal for custom and home theater installations where a professional power sequencer needs to be activated by a consumer electronics device. It perfectly solves the common problem of using a low-power switched outlet, like one found on a receiver or preamp, to trigger a high-capacity system of amplifiers and processors. By sensing the presence of AC power, the PS-REL allows a single wireless remote command to initiate the sequenced power-up of an entire equipment rack, simplifying operation and protecting your components.

$83.95

Learn More